Jobs Index  - Index of recent job listings.
Resumes Index  - Index of recently posted resumes.  - Register here for more Injection Molding Industry Jobs
 < Back  Next >  
Maintenance Technician TN Open (J#26410)
Experience: 4 - 9 years

1. Responsible for maintenance and repair of plant and equipment as follows:
a. Must be safety-conscious following OSHA/TOSHA guidelines, using required personal protective
equipment such as face shields, cut resistant gloves, goggles, masks, etc., and following all
safety programs such as lockout/tagout, hot work permits, safe lifting practices, HAZCOM, etc.
2. Must be able to troubleshoot machines and equipment as follows:
a. Must be able to read and interpret electrical prints, hydraulic prints, mechanical drawings, parts
lists, ladder logic (PLC), use multimeters and various guages to determine failed components.
3. Conduct preventative maintenance on machines and equipment such as changing filters, adding
lubricants, cleaning, following schedules, etc.
4. Perform welding, cutting, and brazing (stick and mig)
5. Install and repair electrical systems as follows:
a. Solid understanding of NEC codes for electrial installation and repair
b. Troubleshoot, repair, or replace sensors, relays, times, temperature controls, nozzle bands, heater
bands, thermocouples, etc.
6. Install and repair plumbing including PVC and iron pipe
7. Install and repair hydraulic components as follows:
a. Replace seals, various equipment, repair leaks, remove and replace pumps, valves, cylinders, etc.
8. Install and repair pneumatic components including valves, actuators, vacuum components, etc.
9. Perform mechanical repairs using manufacturers' prints, diagrams, etc.
10. Uses various hand tools, power tools and equipment
11. Must climb ladders, scaffolding, platforms, aerial lifts, etc as needed
12. Maintains inventory of components and supplies needed for job; communicates shortages to manager
13. Must support and maintain housekeeping efforts
14. Must follow work instructions per TS16949, ISO 14001, etc.
15. Any additional duties as assigned by supervision

1. Minimum 3 years experience in manufacturing plant maintenance with completion of industrial maintenance
education program required OR minimum of 5-7 years verifiable maintenance experience in
injection molding environment with demonstrated technical ability
2. Must be able to read and interpret electrical and hydraulic prints, manufacturers diagrams, etc.
3. Must be able to use various hand tools, power tools, and equipment (must possess own basic tools/toolbox)
4. Must be able to use basic machines such as lathes, mills, drill presses, welder, grinder, etc.
5. Must be able to work in safe manner, with or without supervision, either working alone or in team environment
and at times must take proper steps to insure the safety of others
6. Must be self-starter and able to multi-task
7. Must be able to read, write, perform basic mathematics
8. Must be able to communicate, both orally and in written form
9. Must interface with various personalities at all levels and communicate as needed
10. Forklift operation experience required

1. Must maintain regular and predictable attendance, including frequent overtime, call-backs, or various shift hours
2. Must be able to climb ladders, stairs, scaffolding, etc. using feet, legs, hands, and arms
3. Must be able to balance when walking, standing, crouching on narrow or slippery surfaces
4. Must be able to stoop and bend (requires use of lower extremities)
5. Must be able to kneel, crawl, and crouch using hands, arms, and knees
6. Must be able to use fingers, hands and arms to reach, push, pull, feel, grasp, pick, pinch, and write
7. Must be able to perform repetitive tasks with wrists, hands, arms, and fingers
8. Must be able to speak and hear
9. Must be able to perform heavy work, exerting in excess of 100 pounds of force rarely, and/or
in excess of 50 pounds of force occasionally, and/or in excess of 20 pounds of force frequently to move objects
10. Must have visual accuity to operate various machines, power tools and equipment, distinguish color, etc.
11. May be subject to both inside and outside environmental conditions
12. May be subject to noise and vibration
13. May be exposed to various cleaners, oils, fumes, odors, dusts, mists, gases, or poor ventilation
14. May be exposed to moving mechanical parts, moving vehicles, electrical currents, small spaces, or heights  - Register here for more Injection Molding Industry Jobs is the premier resume database and job search website that focuses specifically on the needs of the injection molding industry. Use this as an exclusive resource to find your next job or employee. We guarantee that you will be pleased with the special focus of this web site.